We supply a comprehensive range of electronic, mechanical and pneumatic water-activation methods for our WCS, basins and showers together with a range of highly capable and flexible electronic controls.
An electronic controller range with the ability to manage water only or water, lighting and power to either one or two rooms, or configurable to any washroom design. Incorporating features such as timed flow, purge cycles, time slots and lockouts, they also log and store individual outlet activity for analysis. Can be used locally or networked.
VIEW DETAILSA simple electronic controller to manage 1x WC direct flush valve. Designed for use with a separate 12v dc power supply for ease of installation; the controller supports both Piezo and Infrared inputs and direct flush valves for both potable and non-potable water supplies.
VIEW DETAILSOur pneumatic controls include an activation button, cross wall fixings and valve to activate a WC, basin or shower.
All of our range of WC Pans, Basins, Baths and Showers are compatible with pneumatic operation. Controlling a single device per unit via a cross wall, they provide a timed flow and eliminate the need for an electrical power supply to be installed.
Although basic in functionality and control our pneumatic activation package provide an effect solution to water activation and control where no electrical power is present.
VIEW DETAILSOur Piezo touch buttons are made of stainless steel and are both anti-ligature and highly robust in design. Electronically operated with no moving parts and no meaningful voltage they integrate with our WDC range of electronic controllers to activate and manage both the associated outlet and the whole washroom environment. Where relevant, the Piezo buttons are supplied complete with all through wall fixings and appropriate markers.
VIEW DETAILSOur infrared touch free sensors are made of stainless steel and are both anti-ligature and highly robust in design. Electronically operated with no moving parts and low voltage they integrate with our WDC range of electronic controllers to activate and manage both the associated outlet and the whole washroom environment. Where relevant the infrared sensors are supplied complete with all through wall fixings and appropriate markers.
VIEW DETAILSOur WVP water valve pack is supplied with solenoid valve(s) and cable(s) for connection to the Wallgate WDC series of plug and play electronic water controllers. The WVP can activate Wallgate basins, showers or vanity tops.
All packs come with 4m cables as standard with bespoke lengths up 20m available. Maximum water efficiency is achieved with basin valves fitted with 5 litre flow restrictors and shower valves 8 litre (other volumes available). Activation is via Piezo touch button or infrared sensor.
VIEW DETAILS
Electronic water flush valve cable range, 4 metre length as standard.
VIEW DETAILSOur manifold assembly blends hot water through a TMV valve to a safe set temperature and then distributes both the blended hot and cold water to basins, showers and WC cisterns via a manifold. Designed to save cost, space and time in construction they integrate with our range of sanitaryware and WDC electronic controllers.
VIEW DETAILSA range of extension cables to enable sensors and valves to be sited further way from the control box than the standard 4 metre cables allow.
VIEW DETAILSOur room isolation key switch is normally located just outside a secure room and enables either just the water supply to be shut down or in addition, the purging of sanitaryware remotely without entering the room, depending on the model.
VIEW DETAILSOur WDC range of electronic controllers are supplied 'network ready' and, when coupled with our powerful WDCMS software, controller operations are monitored and managed via remote PC. Selectable permissions are available to control features for each user, with multiple PCs supported. The remote management allows real time system feedback and remote control of all parameters including manual lock-out overrides and purging, all via a graphical interface.
In addition to remote software, all WDC controllers record automatic (hygiene) purge and all standard operations. Purge and usage data can be downloaded remotely via the WDCMS network or from each unit individually for later reporting and analysis via our database report creator.
VIEW DETAILS